干式喷砂机 DRY BLAST MACHINE
性能好而能耗低。
操作简单、安全可靠。
机器占地面积小，而工作舱却很大。
投资少而收效大。
Versatile Dry Blast Performance With MinimumPower Requirement.
Easy And Safe Operation.
Minimum Space Requirement,But Maximum Area For Component Handling.
And LOW Investment For A High Return.
工作原理：本机通过压缩空气形成一个吸入式系统、通过一个高效喷砂枪进行工作。可用各种磨料、玻璃丸和软磨料加工。
调整简单：通过贮箱下的调节阀，可以调节磨料喷射浓度，用调节阀可以调节压缩空气的压力，用脚踏开关控制工作的停开。
The Process:TA suction system energized by compressed air through a high efficiency blasting gun which interchangeable airjet combinations for single phase compressor operation.The process will operate with awide range of abrasives,glass beads and softblast grits.
Simple Control:Concentration of media is adjustable at the metering jet below the sump,air pressure is variable at the regulator provided at the operator station and the process is contorlled by a pressure foot switch.
电气：
电源：220V 50Hz
照明：150W 220V
电机：0.37KW、单相电动机
直接接220V、50Hz电源
Electrical equipment:
Lighting-150Watt for dieect connection to 220V single phase 50Hz supply
Fan Motor: 0.25KW(1/2HP) single phase motor for direct connection to 220V single phase 50Hz supply
压缩空气：
接头尺寸：G1/2”
气源压力：0.4~0.6MPa
消耗量：1.5M³/min
Compressed air:
Mains connection: G1/2”
Pressure of Compressed air: 0.4~0.6MPa
Air consumption:1.5 M³/min
技术参数：
外廓尺寸：800mm(宽)X880mm(深)X1750m(高)
舱门尺寸：440mm（长）X610mm（宽）
磨料添加量：5-15kg
喷嘴直径：φ9.5mm
Outline size: 500mm(wide)X600mm(deep)X1300m(high)
Door： 440mm（W）X610mm(D)
Initial media charge:5-15kg
Bore of process gun: φ9.5mm
